Filters & Valves

Replacement filters for Nutripure® and SANITAIRE® Atlantic Ultraviolet Corporation Brand Equipment.

Filter types include HEPA, washable, washable/electrostatic, tank vent and disposable.

élan™ water filters are manufactured using durable, Type 304 stainless steel and electropolished for increased resistance to corrosion.The stainless steel units are by Harmsco, Inc.

They are pressure-rated to 150 PSI. Because their outlets are located above their inlets, élan™ up-flow water filters outperform conventional filters and provide the following advantages:

• No air entrapment in the filter housing during operations.
• No vents required because air is self-purged by the élan™.
• No lost capacity due to air pockets; the entire filter medium is utilized at all time.
• No bypass during servicing; liquid can only exit the filter housing after filtering.

The solenoid valve operates in conjunction with the GUARDIAN™ Digital Ultraviolet Monitor, SENTRY™ Safety Sensor or Promate™ Time Delay Mechanism. These valves prevent water flow through the ultraviolet water purifier whenever an abnormal condition is detected and in the event of power failure. Use of the Solenoid Valve is recommended by the U.S. Public Health Service “Criteria for the Acceptability of an Ultraviolet Disinfection Unit”.

Bio-Logic® Pure Water Pack™ 2/5 Micron Carbon and Sediment 10” Cartridges available along with other equivalent replacement filters.

SureFLO™ Flow Control Valves limit water flow to the rated capacity through the ultraviolet water purifier. A complete line of 1/2 gallon per minute to 80 gallons per minute valves, manufactured in PVC or Type 304 Stainless Steel, are available.

The QUANTUM™ Thermal Optimizer thermal relief valve is used to help maintain water temperature where there is a possibility that the water purifier would be cut off from flow for extended periods of time. The QUANTUM™ Thermal Optimizer senses the temperature of the water inside the disinfection chamber.